Fitting The Attachment Clip - Unify OpenStage M3 Operating Instructions Manual

Openstage m3/m3 plus openstage m3 ex/m3 ex plus on hipath cordless enterprise hipath 4000

Hide thumbs Also See for OpenStage M3:

Table of Contents

Putting the handset into service

1. Connect the flat plug from the power adapter to the charger.

2. Plug the power adapter into the plug socket.

To disconnect the flat plug from the charger, press the release button and dis-

connect the flat plug.

Fitting the attachment clip

1. Press the attachment clip pin on the back of the handset until the tabs on the

sides engage audibly in the recesses on the phone.

2. Slide the attachment clip onto the pin as it clicks audibly into place.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the OpenStage M3 and is the answer not in the manual?

Openstage m3 ex plus Openstage m3 plus