Making Calls Using Project Assignment (Cost Billing) - Unify OpenStage M3 Operating Instructions Manual

Conducting calls – enhanced functions
> <
BASIC SERVICE
> <
PIN/COS
> <
PIN 1?
...
Making calls using project assignment (cost
billing)
You can assign external calls to certain projects.
Prerequisite: Project numbers (from 1 to 5) have been configured for certain
projects and you have an account code (ACCT) for the project.
The function must be approved for your communications system.
u
Open the system menu.
[
Select and confirm the basic service.
Either:
o
Enter a service code between 61 (for project number 1) and 65 (for project num-
ber 5).
o
Enter the PIN.
Or:
[
Select the menu item and confirm.
[
Select the required PIN and confirm.
then:
o
Enter the external phone number.
Then make your phone call as usual.
A time limit is applied to project assignment. It is automatically deactivated
if you have not used your handset for a period of more than five minutes,
for instance.
39