During The Conference; Using The Camp-On Function - Unify OpenStage M3 Operating Instructions Manual

60
> <
CONF. TRANSFER
> <
VIEW MEMBERS?
Phone no. party1
NEXT CONF PTY?
NEXT CONF PTY?
> <
STOP VIEWING?
> <
RELEASE PARTY?
> <
REM LAST PTY?
Announce that you are transferring the conference
[
Select and confirm the option shown.
You are disconnected from the conference.
a
Press the On-hook key.

During the conference

You are taking part in a conference with 3 to 8 members and you wish to know
about the other members or to disconnect a certain member or to disconnect the
last member added to the conference.
Viewing member information and disconnecting members
[
Select and confirm the option shown.
The display shows the phone number and possibly the name of the conference
member with the lowest member number.
Either:
[
Confirm to display the next member.
Or:
[
Select and confirm to end the display.
Or:
[
Select and confirm to disconnect this party from the conference. If there were
only three members, the conference is now ended.
Disconnecting the last member added
You wish to disconnect the last party added to the conference.
[
Select and confirm the option shown. The last member added is disconnected.
If there were only three members, the conference is now ended.

Using the camp-on function

If you are expecting an important call, you should activate the camp-on function.
A second call will then be signalled while a call is in progress. You can accept or
ignore the second call.
A second call is not signalled on the Bluetooth headset.
Conducting calls – with multiple users