Using A Different Telephone In The Same Way As Your Own - Unify OpenStage M3 Operating Instructions Manual

40
> <
BASIC SERVICE
L
> <
PIN/COS
> <
PIN 1?
o
o
Using a different telephone in the same way
as your own
You can log on to another telephone belonging to the HiPath 4000 system via a
personal identification number or PIN (this includes telephones of networked
HiPath 4000 systems, for example, at other branches of your company). At the
other telephone you can then:
• make calls and assign the charges to cost centres,
• make calls and assign the charges to specific projects,
• check your mailbox,
• set appointments.
Using an internal PIN, you can have your calls diverted to a telephone in the of-
fice or department where you will be for a temporary period (call forwarding - "fol-
low me").
The function must be approved for your communications system.
Prerequisite: You have been assigned a PIN by the service personnel. You re-
quire an internal PIN for calls within your own HiPath 4000 system, while for
calls involving other HiPath 4000 systems in the integrated network you require
a network-wide PIN.
u
Open the system menu.
[
Select and confirm the basic service.
Either:
Enter the service code 
(61 for PIN 1, 62 for PIN 2 etc.).
Or:
[
Select the menu item and confirm.
[
Select the menu item and confirm.
If you have several PINs and wish to use another one, select the other PIN.
then:
You are prompted to enter the PIN by the message "Enter station no." or "Enter
ID" on the display.
The following applies within the actual HiPath 4000 system:
o
Enter the internal PIN.
Entering the PIN for your own and another HiPath 4000 system within the
integrated network:
o
Enter the 2-digit node code for your own HiPath 4000 system (consult service
personnel).
#
Enter your own number and press the hash key.
#
Enter the network-wide PIN and press the hash key.
Dialling after (successful) identification:
You will hear the dialling tone. The following appears on the display: 
"Please dial".
o
Enter a phone number.
Conducting calls – enhanced functions