Threading; Threading Preparation; Threading The Upper Thread - Bernina 740 Manual

> Select the previously attached stitch plate.
– When the selected stitch plate is suitable in combination with the needle, sewing can be started.
– When the selected stitch plate is not suitable in combination with the needle, the machine prevents
starting automatically.

3.10 Threading

Threading preparation

> Raise the needle.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.

Threading the upper thread

> Place the foam pad on the spool holder.
> Place the thread spool on the pin so that the thread is unwound clockwise.
> Add the appropriate thread disc.
> Guide the thread in direction of the arrow into the rear thread guide and hold the thread with the hands
so that it is taut and can be inserted into the thread pretension.
> Guide the thread in direction of the arrow through the tread pretension.
> Pull the thread in direction of the arrow down (1) around the cover of the thread take-up lever (2).
> Guide the thread in direction of the arrow up (3) and insert it into the thread take-up lever.
036044.50.04_2014-09_Manual_740_EN
Preparation
39