Preparation
Inserting foam pads
The foam pad prevents the thread from getting hooked at the swiveling spool holder.
> Place the foam pad on the swiveling spool holder.
Positioning the spool disc
Spool discs hold the thread spool in place for proper release of thread from the spool.
> Place the foam pad on the spool holder.
> Place the thread spool on the spool pin.
> Position the appropriate spool disc on the spool pin so that there is no space between the spool disc and
the thread spool.
Using a spool net
The spool net provides an even unwinding of the thread from the thread spool and prevents the thread from
knotting and breaking.
> Place the thread spool on the spool holder.
> Pull the spool net over the thread spool.
32
036044.50.04_2014-09_Manual_740_EN