Correcting The Balance; Programming Pattern Repeat; Mirror Image Of Stitch Patterns; Editing Stitch Pattern Length - Bernina 740 Manual

Creative sewing

Correcting the balance

The machine is tested and set optimally before it leaves the BERNINA factory. Different fabrics, threads and
stabilizers can affect the programmed stitch patterns so that they cannot be sewn out correctly. The
electronic balance can correct these deviation and the stitch pattern can be adjusted optimally to the selected
fabric.
> Select a stitch pattern or alphabet.
> Touch the icon «i»-Dialog.
> Touch the icon «Balance».
> Turn the «Lower Multifunctional knob» to correct the horizontal direction of the stitch pattern.

Programming pattern repeat

> Select a stitch pattern or alphabet.
> Touch the icon «i»-Dialog.
> Touch the icon «Pattern repeat» once to repeat the stitch pattern.
> Touch the icon «Pattern repeat» again to repeat the stitch pattern up to 9 times.
x
> Keep the icon «Pattern repeat» touched to deactivate the stitch pattern repeat.

Mirror image of stitch patterns

> Select a stitch pattern or alphabet.
> Touch the icon «i»-Dialog.
> Touch the icon «Mirror image left/right» to mirror the stitch pattern from left to tight.
> Touch the icon «Mirror image up/down» to mirror the stitch pattern contrary to the sewing direction.
> Touch the yellow-framed icon to reset the alteration to basic setting.

Editing stitch pattern length

The stitch patterns can be lengthwise extended or shortened.
> Select a stitch pattern or alphabet.
> Touch the icon «i»-Dialog.
> Touch the icon «Editing stitch pattern length».
> Move the slide with the touchscreen pen or the finger to determine the length of the stitch pattern.
64
036044.50.04_2014-09_Manual_740_EN