Sewing In The Quilting Securing Program; Sewing Handlook Quilt Stitches - Bernina 740 Manual

10.2 Sewing in the Quilting securing Program

Prerequisite:
• The Reverse pattern foot No. 1C/1D is attached.
> Select Quilt stitch pattern No. 1324.
> Press the foot control.
– The machine sews 6 stitches forward automatically when sewing is started.
> Sew the seam at the desired length.
> Press the button «Quick reverse».
– The machine sews 6 stitches forward automatically and stops automatically at the end of the Securing
Program.

10.3 Sewing handlook quilt stitches

Handlook quilt stitches are suitable for all fabrics and sewing projects which should look «hand sewn». It is
recommended to use a monofilament thread as upper thread and an embroidery thread as bobbin thread.
The sewing speed should be moderate to prevent the monofilament from breaking. If required, the upper
thread tension and the balance can be adjusted to the sewing project and the desired quilt stitch.
Prerequisite:
• The Reverse pattern foot No. 1C is attached.
> Touch the icon «Quilt stitches».
> Select the handlook quilt stitch No. 1328 or 1346 or 1347 or 1348.
> If necessary, match the upper thread tension and the balance with the sewing project and the desired
quilt stitch.
> Press the foot control or push the button «Start/Stop» to start the machine.
036044.50.04_2014-09_Manual_740_EN
Quilting
109