Sewing The Manual 5-Step Buttonhole - Bernina 740 Manual

> The machine stops at the height of the last stitch of the first bead.
> Touch the icon «Scrolling down» do that step 6 appears.
– The machine sews the lower bartack and stops automatically.
> Touch the icon «Scrolling down» so that step 7 appears.
– The machine stops and secures automatically.

9.13 Sewing the manual 5-step buttonhole

The length of the beads is manually determinded when sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling via the arrow icons, by direct selection
or by touching the button Quick reverse.
Prerequisite:
• The Buttonhole foot No. 3C (optional accessory) is attached.
> Touch the icon «Buttonholes».
> Select the buttonhole No. 56.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjusting the length manually».
– Step 1 in the display is activated the buttonhole start.
man
> Sew the desired buttonhole length.
– Step 2 is activated.
> Stop at the desired length of the bead or at the marking.
> Touch the icon «Scrolling down» so that step 3 appears.
> The machine sews the keyhole or the eye and stops automatically.
> Touch the icon «Scrolling down» so that step 4 appears.
– The machine sews the second bead in reverse.
> Stop the machine at the height of the first stitch at the buttonhole start.
> Touch the icon «Scrolling down» so that step 5 appears.
– The machine sews the upper bartack and secures automatically.
036044.50.04_2014-09_Manual_740_EN
Buttonholes
105