Selecting The Stitch Plate In The User Interface; Threading; Threading The Upper Thread - Bernina 735 User Manual

Sewing Preparation

Selecting the stitch plate in the User Interface

After changing the stitch plate, you can check whether this can be used with the selected needle.
> Tap «Stitch Plate Selection».
> Select the previously fitted stitch plate.

2.10 Threading

Threading the upper thread

Prerequisite:
•
•
> Place the foam pad on the spool pin.
> Place the thread spool on the spool pin so that the thread unwinds clockwise.
> Attach the appropriate spool cap.
> Guide the thread in direction of the arrow through the rear thread guide (1) and hold the thread with the
> Guide the thread in direction of the arrow through the thread tension (2).
> Guide the thread downwards (3) around the thread take-up lever cover (4).
> Guide the thread upwards and insert into the thread take-up lever (5).
40
– If the selected stitch plate is suitable to be used in combination with the needle, sewing can begin.
– If the selected stitch plate is not suitable to be used in combination with the needle, an error message
is displayed and starting the machine is automatically prevented.
The needle and the presser foot are raised.
The machine is switched off.
hands so that it is taut and can be inserted into the thread tension.
1
2