Preparation
> Push the slide-on table to the right until it engages.
> To remove the slide-on table, push the button down and pull the slide-on table to the left.
3.6 Presser foot
Adjusting the presser position via the lever of the Free Hand System
> Adjust the sitting height so that the lever can be operated with the knee.
> Move the lever with the knee to the right to raise the presser foot.
– Simultaneously the feed dog is lowered and the thread tension is released.
> Release the lever slowly to lower the presser foot.
Adjusting the presser foot position via the button Presser foot up/down
> Press the button «Presser foot up/down» to raise the presser foot.
> Press the button «Presser foot up/down» again to lower the presser foot.
Changing the presser foot
> Raise the needle.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.
34
036044.50.04_2014-09_Manual_740_EN