Deleting Data From The Bernina Usb Stick (Optional Accessory); Calibrating The Buttonhole Foot No. 3A - Bernina 740 Manual

Deleting data from the BERNINA USB Stick (optional accessory)

If saved data on the BERNINA USB Stick (optional accessory) is not needed anymore, the stick can be
connected to the machine and the data can be deleted.
> Insert the BERNINA USB Stick (optional accessory) into the port (1).
1
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Basic settings».
> Touch the icon «Deleting data from USB Stick».
> Touch the icon «Confirm» to delete all data on the BERNINA USB Stick (optional accessory).

Calibrating the Buttonhole foot No. 3A

The Buttonhole foot No. 3A is calibrated to this machine and should only be used both together.
Prerequisite:
• The Buttonhole foot No. 3A is attached.
• The needle is not threaded.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Buttonhole foot No. 3A».
> Touch the button «Start/Stop» to start the calibration.
036044.50.04_2014-09_Manual_740_EN
Setup-Program
55