Edgestitching Using The Seam Guide; Sewing Hem Edges - Bernina 740 Manual

> Select the needle position in the desired distance to the edge.

6.15 Edgestitching using the seam guide

When sewing parallel wider lines, it is recommended to guide the seam guide along the sewn of lines.
> Attach the Reverse pattern foot No. 1C or the Edge stitch foot No. 10/10C/10D (optional accessory).
> Touch the icon «Practical stitches».
– The Straight stitch No. 1 is selected automatically.
> Loosen the screw on the back of the presser foot.
> Insert the seam guide into the hole of the presser foot.
> Adjust the width as desired.
> Tighten the screw.
> Guide the folded edge along the seam guide.

6.16 Sewing hem edges

When using the Blindstitch foot No. 5, it is recommended to select a needle position far left or far right.
When using the Reverse pattern foot No. 1C or the Edge stitch foot No. 10/10C/10D (optional accessory) all
needle positions are possible.
> Attach the Blindstitch foot No. 5 (optional accessory) or the Reverse pattern foot No. 1C or the Edge
stitch foot No. 10/10C/10D (optional accessory).
> Touch the icon «Practical stitches».
– The Straight stitch No. 1 is selected automatically.
> Place the inside upper edge right against the guide of the Blindstitch foot.
036044.50.04_2014-09_Manual_740_EN
Practical stitches
85