Use Of The Power Cable (Usa/Canada Only) - Bernina 740 Manual

My BERNINA

Use of the power cable (USA/Canada only)

The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!
20
Illustration Name
Height compensation
tool
Selection of needles
Seam guide, right
Screwdriver Torx, gray
Screwdriver red
Angular Torx button
Brush
Lubricator
Power cable
Foot control
036044.50.04_2014-09_Manual_740_EN
Purpose
The height compensation tool levels an angled
position of the presser foot sole when sliding over
thick seams.
The needle assortment contains different versions
and sizes of needles for all the common
applications.
The seam guide is very useful as a guideline on the
right of the needle. It supports the alignment of
regular seam distances.
Use the gray screwdriver Torx to change the
needles.
The red screwdriver is supplied as an all-roand tool.
The angular torx screwdriver is used to open the
head frame.
The brush is used to clean the feed dog and the
hook area.
The lubricator is used to fill up the oil depots.
The power cable connects the machine with the
power supply system.
Via the foot control the machine is started and
stopped. The speed of the machine is also
controlled via the foot control.