Updating The Software - Bernina 740 Manual

Setup-Program

Updating the software

NOTICE BERNINA USB stick (optional accessory) has been removed too early
The software has not been updated and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the update has been completed
The latest software and a detailed step by step instruction can be downloaded at www.bernina.com. In
general, personal data and settings are automatically transferred during a software update. For reasons of
safety, it is recommended to save data and settings on a BERNINA USB stick (optional accessory) before the
software update is started. If personal data and settings should get lost during an update, they can be
transferred to the machine again afterwards.
> Insert the BERNINA USB Stick (optional accessory), FAT32 formatted, providing the latest software into
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Updating the machine».
UPDATE
> Touch the icon «Saving data on USB stick».
> Touch the icon «Update» to start the update of the software.
Update
Update
Recovering saved data
NOTICE BERNINA USB stick (optional accessory) has been removed too early
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred
If personal data and settings after a software update are not available anymore, they can be transfered to the
machine again afterwards.
56
successfully.
the port(1).
1
successfully.
036044.50.04_2014-09_Manual_740_EN