Using Cord With The Buttonhole Foot No. 3C (Optional Accessory) - Bernina 740 Manual

Buttonholes
> Pull the ends of the cord through to the wrong side of the fabric (using a hand stitching-needle), knot or

Using cord with the Buttonhole foot No. 3C (optional accessory)

Prerequisite:
•
> Insert the needle at the beginning of the buttonhole.
> Hook the cord over the pin at the back of the buttonhole foot.
> Pull both cords ends under the buttonhole foot to the back and place each a cord into a groove of the
> Lower the buttonhole foot.
> Sew the buttonhole in the usual manner.
> Pull the cord until the loop disappears in the bartack.
100
secure with stitches.
The Buttonhole foot No. 3C (optional accessory) is attached and raised.
sole.
036044.50.04_2014-09_Manual_740_EN