Error Messages - Bernina 740 Manual

Attachment

12.3 Error messages

Message on the display
122
Cause
Stitch number unknown.
Selection of the stitch pattern not
possible in the combi mode.
The feed dog is not lowered.
The selected needle and stitch
plate cannot be used in
combination.
The needle is not at its top end.
The upper thread is used up.
The upper thread has broken.
The main motor isn't running.
036044.50.04_2014-09_Manual_740_EN
Repair
> Check what you have entered and enter a new number.
> Combine any other stitch patterns.
> Push the button «Feed god up/down» to lower the feed
dog.
> Exchange the needle.
> Exchange the stitch plate.
> Adjust the needle poisition via the hand wheel.
> Rethread.
> Rethread.
> Clean the hook.
> Remove the hook and make sure that there are no
broken needle points on the magnetic hook back.