Threading The Double Needle - Bernina 740 Manual

Preparation
> Pull the thread under the presser foot and pull it over the thread cutter from back to front to cut.

Threading the double needle

Prerequisite:
• The double needle is inserted.
> Guide the first thread in direction of the arrow on the right side of the tension disc (1).
> Guide the second thread in direction of the arrow on the left side of the tension disc (1).
1
> Guide the first and the second thread to the thread guide above the needle (see page 39).
> Thread the first thread manually into the right needle.
> Thread the second thread manually into the left needle.
42
036044.50.04_2014-09_Manual_740_EN