Displaying The Presser Foot; Adjusting The Presser Foot Pressure - Bernina 740 Manual

> Push the clamping lever up.
> Remove the presser foot.
> Guide the new presser foot upwards over the cone.
> Press the clamping lever down.

Displaying the presser foot

After the presser foot has been changed, it can be checked whether or not the presser foot is suitable for the
selected stitch pattern. In addition to that, alternative presser feet are displayed which are available for the
currently selected stitch pattern.
> Switch the machine on.
> Select a stitch pattern.
> Touch the icon «Presser foot display».
> Using the touchscreen pen or the finger, wipe up in the area of the presser feet to display alternative
presser feet.
– When the attached presser foot is suitable, sewing can be started.

Adjusting the presser foot pressure

With thick fabrics it is recommended to reduce the presser foot pressure. The advantage is that the
presser foot is slightly lifted so that the fabric can be moved more easily.
> Touch the icon «Presser foot pressure».
50
> Move the slide with the touchscreen pen or the finger to adjust the presser foot pressure.
> Touch the yellow-framed icon to reset the alterations to basic setting.
036044.50.04_2014-09_Manual_740_EN
Preparation
35