Download  Print this page

KYMCO ZX/SCOUT 50 Service Manual Page 169

Hide thumbs

Advertisement

Table of Contents
15
. ELECTRICAL EQUIPMENT
RESISTOR INSPECTION
Remove the frame front cover. ( 12-3)
Measure the resistance between the resistor
B pink wire and ground.
Measure the resistance between the resistor
A green/black wire and ground.
Resistances:
Resistor A: 9.9 10.5Ω
Resistor B: 5.6 6.2Ω
REGULATOR/RECTIFIER
INSPECTION
Remove the front cover. ( 12-3)
Disconnect the regulator/rectifier wire
coupler and remove the bolt to remove the
regulator/rectifier.
Measure the resistances between the
terminals.
Replace the regulator/rectifier if the
readings are not within the specifications in
the table below.
Probe⊕
A (R)
B (W)
Probe(-)
A (R)
B (W)
3-10KΩ
C (Y)
D (G)
C (Y)
D (G)
33-35K
Ω
33-35K
Ω
ZX / SCOUT
Resister A
Resister B
Bolt
Regulator/Rectifier
Coupler
A (Red)
B (White)
C (Yellow)
15-6

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: