. ELECTRICAL EQUIPMENT
Remove the battery cover.
Disconnect the battery cables .
Remove the bolt and battery bracket.
Remove the battery.
The installation sequence is the reverse of
BATTERY CHARGING (OPEN CIRCUIT
Remove the battery cover and disconnect
the battery cables.
Measure the voltage between the battery
Fully charged : 13.0V 13.2V
: 12.3V max.
Connect the charger positive (+) cable to
the battery positive (+) cable.
Connect the charger negative (-) cable to
the battery negative (-) cable.
Charging current : Standard : 0.4A
: Standard : 5 hours
After charging: Open circuit voltage: 12.8V
: 0.5 hour
ZX / SCOUT
Power Lamp (Green)
Charging Lamp (Red)