KYMCO ZX/SCOUT 50 Service Manual page 175

15
. ELECTRICAL EQUIPMENT
ZX / SCOUT
STARTER RELAY INSPECTION
Remove the battery cover.
Starter Relay
Disconnect the starter relay coupler and
then remove the starter relay.
Connect the starter relay green/yellow
terminal to the 12V battery positive (+)
Red Yellow/Red
terminal and the relay yellow/red terminal
to the battery negative (-) terminal.
Check for continuity between the starter
relay red and red/white terminals. The
relay is normal if there is continuity.
Red/White Green/Yellow
STARTER MOTOR REMOVAL
Bolts
Disconnect the starter motor cable.
Remove the two bolts attaching the starter
motor and remove the starter motor.
The installation sequence is the reverse of
removal.
15-12