KYMCO ZX/SCOUT 50 Service Manual page 81

8
. KICK STARTER/DRIVE PULLEY/
CLUTCH/DRIVEN PULLEY
DRIVE BELT
Remove the left crankcase cover.
INSPECTION
Check the drive belt for cracks, separation
or abnormal or excessive wear.
Measure the drive belt width.
Service Limit:
16.5mm replace if below
Use specified genuine parts for
replace-ment.
REPLACEMENT
Remove the nine left crankcase cover bolts
and left crankcase cover. ( 8-3)
Hold the clutch outer with the universal
holder and remove the 14mm clutch outer
nut and clutch outer.
Hold the drive pulley with the holder and
remove the drive face nut.
Remove the starting ratchet.
Remove the drive pulley face.
8-7
Clutch Outer Clutch Outer Nut
Ratchet Drive Face
Drive Face Nut
ZX / SCOUT