Optional Twig Set Installation - Firegear KWCH-2 Owners & Installation Manual

INSTALLATION
Read the instructions below carefully and refer to the
images. If the Logs/Twigs are broken do not use the unit
until they are replaced.
Broken Logs/Twigs can interfere with pilot operation.
Improper positioning of the Logs/Twigs may create carbon
build-up and can alter the unit's performance which is not
covered under warranty.
Log/Twig set # 326-930 contains the following pieces:
Description
Log/Twig A
Log/Twig B
Log/Twig C
Log/Twig D
Log/Twig E
Log/Twig F
1) Install Log/Twig A as shown below. Orient the Log/Twig in the same way and in a similar location on the right side of the burner as shown in
Diagram 2.
2) Install Log/Twig D on the burner as shown below. Orient the Log/Twig in the same way and in a similar location on the right side of the burner
as shown in Diagram 3.
3) Install Log/Twig E on the burner as shown below. Orient Log/Twig E across Log/Twig D in the same way and in a similar position as shown in
Diagram 4.
24

OPTIONAL TWIG SET INSTALLATION

Diagram 2
Diagram 3
E
Diagram 4
A
B
C
Diagram 1
A
Firegear Outdoors® Key West™ Series
D
E
F
D
D