Firegear KWCH-2 Owners & Installation Manual page 15

8. Remove panel on opposite end by lifting up and off.
9. Disconnect and remove LP tank.
Diagram 8
10. Remove 3 screws in locations shown below to remove side panel.
Note: Coffee height table requires removal of only 2 screws (no middle
screw).
11. Remove LP hose from valve.
LP hose
Firegear Outdoors® Key West™ Series
Diagram 9
Diagram 10
INSTALLATION
Coffee table unit only
Location to install
Access for
regulator
Hard line
(knockout) Diagram 11
Island and Cocktail table units
Location to install
regulator
Access for
Hard line
(knockout)
Diagram 12
15