Lp Tank Installation - Kwch Only - Firegear KWCH-2 Owners & Installation Manual

NOTE: Max. tank size 11lb.
1) Lift up and remove end panel (opposite end of gas knob).
3) Loosen butterfl y bolt to allow LP tank to be seated on the holder.
4) Seat tank on tray and tighten butterfl y bolt to secure tank to tray.
Firegear Outdoors® Key West™ Series

LP TANK INSTALLATION - KWCH ONLY

5) Connect the LP regulator quick connect to the tank.
7) Check all gas connections (both valve train & LP tank) under normal
operating pressure, for leaks, with soapy water.
NOTE: If soap bubbles, this would indicate a gas leak.
IMPORTANT:
KWB (Coffee height only)
To avoid tank pressure regulator freezing - when using an 11LB LP tank,
it is recommended the appliance is run on low (turned down 30%).
Note: To turn off gas at LP tank source, lift up panel with handle and tilt forward
to access control.
INSTALLATION
Gas connection
@ tank
19