If You Have Difficulty Printing - Xerox DocuColor 4 Administrator's Manual

2.8
If you have difficulty printing, check the printer status, use the table below
to try and resolve the problem, and try printing again.
2
44

If you have difficulty printing

None of the control
panel lights are on, and
nothing appears in the
LCD.
The data light neither
blinks nor stays on
constantly (it stays off)
when a print job is sent
over the network or the
parallel connection, or
a copy job is sent from
a DocuColor 4 CP.
The power switch has not
been turned on.
The power cord is not se-
curely attached.
There is no power to the
electrical outlet itself.
The interface cable is not
connected properly.
Either the printer driver
is not installed, or the
computer has not been
correctly set up.
Check the power
switch.
For more information,
see the Setup Guide.
Check the power cord.
For more information,
see the Setup Guide.
Check and see if the
outlet is turned on.
Make sure the network or
parallel cable connector is
properly attached.For
more information, see the
Setup Guide.
Check the settings on
the host computer. For
more information, see
the Setup Guide.