Configuring Windows Nt 4.0 Clients - Xerox DocuColor 4 Administrator's Manual

4.8
Each client of a Windows NT 4.0 server is already using a network protocol
to communicate with the server. Each client can print to the DocuColor 4 LP/
CP if it has been shared by a Windows NT 4.0 Server or Windows NT 4.0
Workstation computer. In that case the client does not have to use the same
network protocol to connect to the Windows NT 4.0 server as the server uses
to communicate with the DocuColor 4 LP/CP.
To connect and print to the DocuColor 4 LP/CP shared by the
Windows NT 4.0 server:
For Windows NT 4.0 Workstation clients, before printing, connect to the
print server computer and select the DocuColor 4 LP/CP. Right mouse click
and choose the Open command. When prompted, click Yes to have Win-
dows set up the printer.
4
After clients have selected the printer, they can choose it from the Print Setup,
Page Setup or Print dialog box of their application. Clients can change print-
ing options for their own job, but printer properties are grayed and not avail-
able for changing. When a client chooses Print, the job is transmitted to the
Windows NT 4.0 print server, and from there to the selected queue on the
DocuColor 4 LP/CP. The job is listed in the Print Manager on the client work-
station, and the administrator can track it in the DocuColor 4 LP/CP window
in the Print Manager on the Windows NT 4.0 print server.
94
Configuring Windows NT 4.0
clients