Parallel Cable Connection - Xerox DocuColor 4 Administrator's Manual

1.6

Parallel cable connection

In addition to receiving print jobs over Ethernet, the DocuColor 4 LP/CP can
accept print jobs from a Windows computer through its high-speed, bi-di-
rectional parallel port. This connection is advantageous for portable com-
puters and for workstations that use dedicated networks using protocols other
than AppleTalk, TCP/IP, or IPX.
The parallel port connection can be active at the same time as the network
ports.
To use parallel cable:
With the DocuColor 4 LP/CP and the Windows computer turned off, attach
the parallel cable to the parallel port of the DocuColor 4 LP/CP.
The illustration on pages 12 and 13 for the location of the parallel port.
Connect the other end of the cable to the parallel port on the Windows
computer.
Turn on the computer and the DocuColor 4 LP/CP.
Proceed to "Setting up the Print Functions".
To print to the parallel port, you need to set up the parallel port
connection (see "Parallel Port Setup").
For information on setting up printing to the parallel port, see the User
Guide.
Parallel cable is an optional item for DocuColor 4 CP. It is a mini
Centronics cable available from Xerox as part number 98S4330.
1
15