Stages Of Installation On The Network - Xerox DocuColor 4 Administrator's Manual

1.2 Stages of installation on the
network
Installation can be performed by a network or printing administrator. The
stages of a successful installation are:
• Physically connecting the DocuColor 4 LP/CP to a functioning network
Prepare a network node for the DocuColor 4 LP/CP- network cable and
route it to the location where the DocuColor 4 LP/CP will be installed, and
attach the cable to the network interface of the DocuColor 4 LP/CP.
See page 5 for details.
• Configuring network servers
When network servers are required, you need to configure those servers
to provide client access to the DocuColor 4 LP/CP as a color PostScript or
PCL printer/copier.
See Chapter 4 for information on configuring network servers in Windows
environments.
• DocuColor 4 LP/CP Setup
Configure the DocuColor 4 LP/CP for your particular printing and net-
work environment.
See Chapter 2 for details.
• Client setup
Install the files needed for printing, install additional user software, and
connect the client to the DocuColor 4 LP/CP over the network. These steps
are described in the User Guide.
• System administration
Monitor and maintain system performance and troubleshoot problems that
arise.
See Chapter 6 and the User Guide for details.
1
3