Operational Safety - Xerox DocuColor 4 Administrator's Manual

Your Xerox printer/copier and supplies were designed and tested to meet strict safety
requirements. These include safety agency examination, approval, and compliance with
established environmental standards.
Your attention to the following safety guidelines will help ensure the continued safe
operation of your printer/copier.
• Use the materials and supplies specifically designed for your printer/
copier. The use of unsuitable materials may result in poor performance
and possibly a hazardous situation.
• Follow all warnings and instructions marked on, or supplied with, the
printer/copier.
• Place the printer/copier in a room that provides adequate space for venti-
lation and servicing.
• Place the copier printer/copier on a level, solid surface (not on a thick pile
carpet).
• Do not place the printer/copier near a heat source.
• Do not place the printer/copier in direct sunlight.
• Do not place the printer/copier in line with the cold air flow from an air
conditioning system.
• Do not put containers of coffee or other liquids on the printer/copier.
• Do not block or cover the slots and openings on the printer/copier. With-
out adequate ventilation, the printer/copier may overheat.
• Do not attempt to override electrical or mechanical interlock devices. Be
careful when working in areas identified with this warning symbol. These
areas may be very hot and could cause personal injury.
If you need any additional safety information concerning the printer/copier or materials,
contact your authorized Xerox dealer.

Operational Safety

ix