Main Printer Setup Menus - Xerox DocuColor 4 Administrator's Manual

At this screen:
RESETS
SYSTEM SETUP to
NETWORK SERVICES SETUP
VISUALCAL
COLOR ADJUSTMENT
PANEL LANGUAGE
2.3.2

Main Printer Setup Menus

The following table lists the main Setup menus and their functions (for a
complete list of top-level menus, see page 22).
I/O PORT SETUP, NETWORK PROTOCOL SETUP, and NETWORK
SERVICEs SETUP appear only for networked printers.
SYSTEM SETUP
• With CLEAR LOG/QUEUES displayed,
• With FORMAT DISK displayed, formats the
• With RESET COLOR displayed, resets
• With RESTORE DEFAULTS displayed, re-
• With RESTART PRINTER displayed,
The Setup menus enable you to specify infor-
mation about the printer/copier and to set a
password to limit access to printer Setup menus.
(For more information, see "Main Printer Setup
menus" below.)
Allows you to calibrate the printer's color pro-
duction. For information on VisualCal color
calibration see the User Guide.
Allows you to adjust the density and brightness
of Dry Ink. For information on Color Adjust-
ment see the User Guide.
Allows you to select a language for control
panel pages and Fiery WebTools. See Sec-
tion A.6 of Setup Guide.
Choose:
System settings for the printer/copier; set
or change the administrator password
used to limit access to the Setup menus.
2.3 Setting up the printer/copier
Press Item/Enter:
clears the Job Log and all print queues.
hard disk.
printer's color calibration to factory settings.
turns all modifiable settings to their defaults.
reboots (restarts) the printer/copier.
To specify:
2
See:
page 24
23