Bindery Setup - Xerox DocuColor 4 Administrator's Manual

2.6 Network Services Setup
BROWSE TO PRINT
Q SUBTREE ROOT
This message is displayed if you selected SUBTREE in the previous screen.
To advance to the NDS browse screens, and browse to the print queue root,
press Item/Enter.
2
Navigate the NDS objects as before. Press Item/Enter to display objects be-
low the level of the selected object in the previous screen's second line.
When you see the print queue subtree object in the second line, press Item/
Enter. In the next screen, scroll to display "." in the second line and press
Item/Enter to end your search.
PRINT Q ROOT
The selected object is displayed. Press Item/Enter to accept.
2.6.2

Bindery Setup

The following screens are used for Bindery setup. Be sure that the printer is
connected to the network and that you have already configured one or more
Netware 3.x file servers with a print server and a print queue for print jobs.
Note that you can also configure Netware 4.x servers to run in Bindery emu-
lation mode, but you cannot add a 4.x server running in emulation mode that
is on the tree you selected in NDS Setup.
For more information on setting up printing using Novell NetWare, see "on-
figuring a NetWare server for printing".
The NetWare server must be running. You need a login name, and a pass-
word, if one has been set.
ENABLE BINDERY
YES/NO [YES]
Use this option to enable bindery emulation services.
38