Printer Setup Options - Xerox DocuColor 40 User Manual

2
2-36 Performing Setup from the Control Panel
1. In the main Setup menu, choose Printer Setup.
Exit Setup
Server Setup
2. Enter the options appropriate to the printing requirements at the site.
Network Setup
Printer Setup
Setup
3. When you have finished, save changes.
• —The Printed queue is a job storage area on the DocuColor 40 CP
Printed queue
disk; it contains the most recent jobs printed from the Print queue. The Printed
queue makes it convenient to reprint those jobs. A Server Setup option enables this
queue and governs the maximum number of jobs retained in it at any given time (see
page 2-9). Reprinting jobs in this queue requires WebSpooler.

Printer Setup options

Printer Setup configures the connections and printing behavior associated with a
particular printing device. For more information on DocuColor 40 CP print
connections, see page xv of the Introduction.
Printer Setup includes:
• Publishing the Direct connection
• Publishing the Print queue
In the list of options that follows, default values, where applicable, appear in square
brackets.
Publish Direct Connection
Yes/No [Yes]
This option enables users to print (or download) jobs to the DocuColor 40 CP with-
out spooling. Note that jobs printed to the Direct connection are not saved in the
Printed queue.
If you plan to download fonts from any system to the DocuColor 40 CP, you must
publish the Direct connection. If you do not want users to print to Direct, choose
Publish Print Queue
Yes/No [Yes]
This option enables users to print (or download) jobs to the Print queue. Jobs that are
printed to the Print queue are spooled to the DocuColor 40 CP disk and printed on a
first-in, first-out basis. Only queues published in the Printer Setup are available to
remote users.
No .