Opening Lists With The Message Key - Siemens Gigaset SL370 User Manual

Using the directory and lists
Automatic Redial
The selected number is automatically
dialled at fixed intervals (at least every
20 seconds). The handsfree key flashes
and "open listening" is activated.
– Party answers: press the talk key
c. The function is ended.
– Party does not answer: the call is ter-
minated after approx. 30 seconds.
The function is ended after pressing
any key or after ten unsuccessful
attempts.
(as in the directory,
Display Number
page 21)
Delete Entry (as in the directory, page 21)
Delete List (as in the directory, page 21)
Opening lists with the
message key
You can use the message key f to open
the following list selection:
u
SMS list
If several mailboxes are set up
(page 31), several lists are displayed.
u
Network mailbox, if your network pro-
vider supports this function and the
network mailbox is set for fast access
(page 35).
u
Call history
An advisory tone sounds as soon as a new
message arrives in a list. The message key
f flashes (it goes off when the key is
pressed). In idle status, the display shows
an icon for the new message:
Icon New message...
Ã
... on the network mailbox
Á
... in the call history
À
... in SMS list
The number of new entries is shown
beneath the corresponding icon.
24
List selection
If you press the message key f, only
the lists that contain messages are shown
(exception: network mailbox). Lists with
new messages are identified in bold:
Messages & Calls
Mailboxes: (2)
SMS: (1)
Calls List: (4)
"
OK
Select a list with q. To open, press w
or .
§OK§
If only one list contains entries, no list
selection is offered and the relevant list is
displayed immediately.
Incoming SMS message list
All received SMS messages are saved in
the incoming message list, page 29.
Call history
Precondition: Calling Line Identification
(CLIP, page 16)
Depending on the type of list set, the call
history contains
u
accepted calls (
u
missed calls
Depending on the type of list set, all num-
bers of the last 30 incoming calls are
stored or only the missed calls.
You can also call up the call history via the
menu:
¢
w
Calls List
‰
)