Chapter 24 Switch-Related Commands; Overview; Switch Mib Commands; Table 24-1 Mib, Port And Vlan Switch Command Summary - ZyXEL Communications VES-1000 Series User Manual

This chapter shows you how to configure your VES using switch-related commands.

24.1 Overview

The following table is an overview of the MIB, port and VLAN switch-related CI commands.

Table 24-1 MIB, Port and VLAN Switch Command Summary

COMMAND
sw mib status Use this command to see the port n mib counters.
sw mib clear Use this command to clear port n of mib counters.
sw port status Use this command to see the link status of all ports.
sw vlan status Use this command to view all VLAN settings.
sw vlan set Use this command to set port(s) x1, x2, etc. to be the egress
port(s) (outgoing ports) for port "n".
sw vlan clear Use this command to clear the VLAN setting of port n.

24.2 Switch MIB Commands

The following are the most common MIB CI commands.
24.2.1 MIB Status Command
sw mib status n
This command allows you to view the MIB of port "n" where "n" is a port number.
Switch-Related Commands
Switch-Related Commands
DESCRIPTION
sw mib status 13 Displays the MIB of port 13 as follows:
VES-1000 Series Ethernet Switch
Chapter 24
EXAMPLE
sw mib view n
sw mib clear n
sw port status
sw vlan status
sw vlan set n, x1, x2
sw vlan clear n
24-1