The Tftp Server Name Screen - ZyXEL Communications VMG Series User Manual

You need to know the MAC address of the LAN device. It may be on a label on the device or in its
documentation.
Click Network Setting > Home Networking > Wake on LAN to open this screen.
Figure 118 Network Setting > Home Networking > Wake on LAN
The following table describes the labels in this screen.
Table 58 Network Setting > Home Networking > Wake on LAN
LABEL
Wake by
Address
IP Address
MAC Address
Wake up

8.8 The TFTP Server Name Screen

Use the TFTP Server Name screen to identify a TFTP server for configuration file download using DHCP
option 66. RFC 2132 defines the option 66 open standard. DHCP option 66 supports the IP address or the
hostname of a single TFTP server.
Click Network Setting > Home Networking > TFTP Server Name to open this screen.
Figure 119 Network Setting > Home Networking > TFTP Server Name
Chapter 8 Home Networking
DESCRIPTION
Select Manual and enter the IP address or MAC address of the device to turn it on remotely. The
drop-down list also lists the IP addresses that can be found in the Zyxel Device's ARP table. Select
an IP address and it will then automatically update the IP address and MAC address in the
following fields.
Type the IPv4 IP address of the device to turn it on.
Type the MAC address of the device to turn it on. A MAC address consists of six hexadecimal
character pairs.
Click this to send a wake up packet to wake up the specified device.
VMG/XMG Series User's Guide
199