True CS400 Owner's Manual page 23

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 8: Floor Levelers:
a) If necessary, adjust four levelers on
bottom of machine to accommodate
uneven flooring.
STEP 9: Remove Transport Handles:
a) Once Elliptical is moved into its
final location, remove the two
Handle Bars on the back of the
machine and store with owner's
manual for future use.
STEP 10: Remove Protective Film from Decals:
a) Once Elliptical is moved into its
final location, remove the protective
film from the decals and from the
"True" on the lower shroud.
Truefitness.com / 800.426.6570 / 636.272.7100 19