True CS400 Owner's Manual page 14

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 1: Assemble Pedestal to Base:
a) Remove Front Handles before
assembling Pedestal.
b) Use 2 people to slide the Pedestal
straight down onto the Base and be
careful to not pinch the wires on the
right side of the base.
c) Use 2 M12x12mm bolts and 8
M8x12mm bolts to attach Pedestal to
Base and then connect the cables
coming from the right pedestal to
the corresponding wires in the base.
Hardware Required (Bag 1):
8 M8x12mm Bolts
2 M12X12mm Bolts
Insert these bolts
first to help align
other bolts
Truefitness.com / 800.426.6570 / 636.272.7100
M8x12mm
Bolts
M12x12mm
Bolt
10