True CS400 Owner's Manual page 22

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 6: Console Assembly (continued) – Rear Console Cover:
e) Attach the Rear Console Cover
using 2 M5x12mm screws.
Hardware Required (Bag 6):
2 M5x12mm Screws
2 M8x12mm bolts
STEP 7: Front Guard & Boot Covers:
a) Slide front guard between the
front covers and the frame and
secure it to the frame using 4 M8x20
bolts.
Hardware Required (Bag 7):
2 M8x20mm Bolts
M8x20mm bolts
d) Snap the 2 Front Boot Covers
into place on the base and use 4
M4 screws to tighten down the
Boot Cover.
Hardware Required (Bag 7):
4 M4 Screws
Truefitness.com / 800.426.6570 / 636.272.7100 18