True CS400 Owner's Manual page 18

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 6: Console Assembly – Console Mast:
a)
Slide Console cables through
2 M8x12mm bolts
Console Mast and attach Mast using
2 M8x12mm bolts and 2 M8x20mm
bolts.
CAUTION: Do not pinch wires!
Hardware Required (Bag 6):
2 M8x12mm Bolts
2 M8x20mm Bolts
Route Cables Here 2 M8x20mm bolts
STEP 6: Console Assembly – Front Neck Panel:
b) Attach Front Neck Panel to the
Front Mast using 2 Phillips head
bolts.
Hardware Required (Bag 6):
2 M5x12mm Bolts
STEP 6: Console Assembly – Console Mounting:
c) Attach Console to the Console
Mast with 4 M5x10mm bolts.
d) Attach the console ground wire to
the Console Mast
Ground
Hardware Required:
Screw
*Included with Console
Truefitness.com / 800.426.6570 / 636.272.7100 14