Console Assembly - True CS400 Owner's Manual

CHAPTER 3: PRODUCT OVERVIEW
ELLIPTICAL OVERVIEW (continued):

Console Assembly

:
The console allows the user to set up a workout program and control the elliptical during a workout (For console overview
and operation instructions refer to the owner's manual for the selected console option).
Upper Exercise Arms:
Moving handles on the elliptical that provide resistance to the upper body during a workout.
Contact Heart Rate Pads:
Allows the user to check their heart rate without wearing a wireless chest strap.
Side Steps:
The stationary steps on either side of the elliptical, which allow the user to safely straddle the footpads during startup, to
isolate upper body, or in the event of an emergency.
Transport Handles Access:
Threaded sockets in the frame of the elliptical that will accept the transportation handles.
Foot Pads:
Moving pedals on the elliptical that provide resistance to the lower body during a workout.
Leveling Feet:
An adjustable system used to aid in the leveling the elliptical.
Coaxial Port:
Delivers television signal to the unit.
Ethernet Port:
Used to provide a network connection for compatible console options.
Power Cord:
Delivers power from the wall outlet to the elliptical.
Port Plug
Battery Charge Port:
A port used to charge the unit's internal battery. To expose the port remove
the rubber port plug on the inner right shroud as shown in figure to the right.
Truefitness.com / 800.426.6570 / 636.272.7100 25