Chapter 2: Assembly Instructions; Pre Assembly Checklist - True CS400 Owner's Manual

CHAPTER 2: ASSEMBLY INSTRUCTIONS

• Read and understand all instructions and warnings prior to use.
•
Obtain a medical exam before beginning any exercise program. If at any time during exercise you
feel faint, dizzy, or experience pain, stop and consult your physician.
• Obtain proper instruction prior to use.
• Inspect the elliptical for incorrect, worn, or loose components and do not use until corrected,
replaced, or tightened prior to use.
• Do not wear loose or dangling clothing while using elliptical.
• Care should be used when mounting or dismounting elliptical.
• Disconnect all power (if applicable) before servicing elliptical.
• Do not exceed maximum user weight of 400 lbs.
• Keep children and animals away.
• Do not operate an electrically powered elliptical in damp or wet locations.
• All exercise equipment is potentially hazardous. If attention is not paid to the conditions of
equipment usage, death, or serious injury could occur.
• Keep the top side of the moving surface clean and dry.
Should you need technical assistance in assembly of your TRUE Fitness product, contact TRUE Fitness Technical Support
*
at 1-800-883-8783.
PRE-ASSEMBLY CHECK LIST
Tools Required:
10mm hex key (Included)
6mm hex key (Included)
#2 Phillips Screwdriver
IMPORTANT SAFETY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100
:
Hardware:
Hardware is packaged in numbered
plastic bags that correspond to the
step with which they are used. Not
all steps require hardware.
7