Entering Characters Using The On-Screen Keyboard - Sony Ipela PCS-XG80S Operating Instructions Manual

To delete all the characters entered
Press the F3 button.

Entering Characters Using the On-Screen Keyboard

This section explains how to enter the letters or numbers in the text box in the
menu using the on-screen keyboard displayed on the monitor screen.
When "Display On-Screen Keyboard" is set to "On" in the Menu Screens page
of the General setup menu (page 82), the on-screen keyboard automatically
appears on the screen if character input is required in the menu.
Note
You can also use the buttons on the Remote Commander even when the on-screen
keyboard is displayed on the screen.
To enter letters or numbers
1
Use the V, v, B or b button on the Remote Commander to select "Num"
or "Alpha" on the on-screen keyboard, then press the ENTER button.
Select "Num" to enter numbers, and "Alpha" to enter alphabetic letters.
2
Use the V, v, B or b button on the Remote Commander to select the button
on the on-screen keyboard on which the desired character is indicated, then
press the ENTER button.
When you select a number, the selected number is entered.
When you select an alphabetic letter, a submenu with available letters
appears on the on-screen keyboard. Select the desired letter and press the
ENTER button on the Remote Commander. The selected letter is entered.
58
Using the Menus
Num 1 ABC
GHI JKL
Alpha
PQRS TUV
0
Space
End
DEF
Back
Space
MNO
WXYZ Symbol
Dot
Cancel