CARF-Models
The following pictures illustrate the completely installed landing gear and gear covers. A
3mm ball-link setup is used.
To prevent the main gear cover from fluttering and to assure a more positive sit within the
recess, we added a lengthwise reinforcing strip. The final positioning is by trial and error to
ensure that it does not interfere with the closing of the cover. It must not contact any part of
the gear unit or airframe.
1.2. Installation of the aileron and flap servos
1.2.1 Aileron servo installation
SIAI Marchetti SF-260
www.carf-models.com
The aileron hatch covers and wood reinforced
openings are pretty much ready for servo
installation.
- 15 -