CARF-Models
4. Miscellaneous
4.1 Tail Cone
Before mounting the tail cone, check that the
contact surfaces (trial fit) mate cleanly.
4.2. Spinner and Propeller
The 120mm spinner and backplate is available from CARF.
The spinner base-plate must be fitted (drilled) to fit the prop drive of the appropriate motor.
SIAI Marchetti SF-260
www.carf-models.com
The (optional) white tail light should be
installed before fitting the tail cone. The
tail cone can be attached however
preferred with silicone adhesive or
screws (attachment materials are not
included).
- 40 -