Carf-Models SIAI Marchetti SF-260 Construction Manual page 17

CARF-Models
The output arms normally supplied with servos
are, for a model of this size, generally
inadequate! Better arms from aluminium or
carbon- reinforced nylon are available for
nearly all servo makes.
SIAI Marchetti SF-260 www.carf-models.com
The servo is installed directly to the hatch
cover with a plywood frame (frame glued to
cover with 30 minute Epoxy) from parts
included (see photo).
Important: Rough up the gluing area with
sandpaper and clean!
Before gluing, the exact position of the
mounted servo must be determined and
marked.
When the Epoxy has cured, the servo can be
screwed into the frame. Install with the servo
output shaft toward the wing leading edge.
- 16 -