Carf-Models SIAI Marchetti SF-260 Construction Manual page 33

CARF-Models SIAI Marchetti SF-260 www.carf-models.com
If a landing light is to be used, the corresponding marked area of the cowl must be cut open
and cleanly sanded out to size.
The gluing areas of the oil cooler scoop moulding - below the landing light - and the intake lip
are lightly scuffed and cleaned prior to gluing. The lip is then glued to the main body of the
scoop.
If the motor has been correctly aligned in the cowl, the spinner should line up properly. But,
it doesn't hurt to check.
- 32 -