Alternate Rudder Servo Installation - Carf-Models SIAI Marchetti SF-260 Construction Manual

CARF-Models

Alternate Rudder Servo Installation

The parts consist of:
- Horizontal mounting plate (3.3mm plywood) for the rudder servo
- Vertical mounting plate (3.3mm plywood) for the tow release servo
- 1 x reinforcement gusset (plywood)
- 2 x servo mount doublers (plywood)
- Fiberglass matt for fuselage/servo-board reinforcement
SIAI Marchetti SF-260 www.carf-models.com
Future kits will provide an alternate method for
mounting the rudder servo, together with an
optional servo location for an air-tow release,
installed directly behind the cockpit opening.
.
The necessary parts will be included with the
newer kits.
- 24 -