Carf-Models SIAI Marchetti SF-260 Construction Manual page 14

CARF-Models
The fiberglass part has a factory built-in seam
with integrated fabric hinge. In order that the
hinge opens wide enough, lightly file the
edges of the hinge-line at a shallow angle
(see photo), taking care not to damage the
hinge material.
Use masking tape to protect the gelcoated/painted surfaces.
The cover is laid in the recess, and secured with tape. Drill 2mm holes thru the cover and
the plywood strips glued in from a previous step.
SIAI Marchetti SF-260
Then, remove the cover and open out the hole to
3mm (ONLY in the cover).
www.carf-models.com
- 13 -